Hongbo Motor understands the importance of product compliance and documentation in industrial equipment sourcing. Explore available certification documents and request model-specific information for your application and target market.
UL component certification, conformity documentation and supplier audit records.
02 / CERTIFICATIONS
Certification Information for Industrial Fan Buyers
Industrial cooling fans may be subject to different electrical safety, environmental and market-specific requirements. Applicable certification and compliance documentation depends on the product model, electrical configuration and intended market.
Hongbo Motor provides available documentation to help OEM customers, equipment manufacturers and distributors review product suitability during sourcing and engineering evaluation.
Before selecting a fan for a regulated application, customers should confirm the relevant model, operating voltage, applicable standard and required certification scope.
03 / CERTIFICATIONS
Product Certifications & Compliance Documentation
Review the actual documents below, then confirm the file scope for the fan you intend to purchase. A certificate, conformity document and supplier audit serve different purposes.
Verify with issuer ↗
Product certification / component
UL Component Certification
Applicable UL documentation can help customers review relevant electrical safety requirements for specific fan models. Please confirm the exact product configuration and certification coverage.
CE-related documentation may be available for relevant product models intended for applicable European market requirements. The applicable legislation and standards depend on the product configuration.
The supplied SGS audit cover page records an initial supplier audit of Ningbo Hongbo Weite Motor Co., Ltd. It supports a supplier review and must be distinguished from product certification.
No RoHS declaration, restricted-substance test report or CCC certificate was found in the supplied materials. These remain document inquiries in this preview.
RoHS Documentation
Available RoHS-related documentation supports the review of restricted substance requirements for applicable electrical and electronic products.
Provide a model-specific declaration or test report before publishing any RoHS compliance claim.
Where applicable, CCC documentation identifies the products and configurations covered by the relevant certification requirements for the Chinese market.
Provide the actual certificate and confirm product applicability before publishing a CCC certification claim.
Certification coverage may vary between models, motor configurations, voltages and product variants. Use the available documentation below to review the relevant product scope.
All supplied documentsUL component certificationCE-related conformity documentSupplier auditRoHS — no source suppliedCCC — no source supplied
Search matches documented model identifiers. No voltage is inferred from the A1/A2 suffix. The CE attachment is missing and the supplier audit does not establish product certification.
3 of 3 document records
Source document records, with model coverage and verification status
Certification Type
Fan Model / Series
Document Number
Issuer / Declaration Owner
Applicable Standard
Validity / Version
Document
ULProduct certification / component
AC component fans · 14 variants
20170119-E489230
UL LLCHolder: NINGBO HONGBO WEITE MOTOR CO.,LIMITED
UL 507 – Standard for Electric Fans CAN/CSA C22.2 No. 113-15 – Standard for Fans and Ventilators
No expiry date printed. Current validity and exact configuration require confirmation.Official record located; live status unverified
The addendum states that (X) can be any number or digit. A1 and A2 are separate variants; no operating voltage is assigned in this certificate.
HB8025-A1(X)
HB8025-A2(X)
HB9225-A1(X)
HB9225-A2(X)
HB11025-A1(X)
HB11025-A2(X)
HB12025-A1(X)
HB12025-A2(X)
HB12038-A1(X)
HB12038-A2(X)
HB15050-A1(X)
HB15050-A2(X)
HB17251-A1(X)
HB17251-A2(X)
Voltage and frequency are not specified in the supplied certificate. Confirm the exact configuration and conditions of acceptability.
Issued to / holder
NINGBO HONGBO WEITE MOTOR CO.,LIMITED
Manufacturer
Not separately identified in the supplied certificate
Issue / audit date
2017-01-19
Verification note
UL Product iQ records GPWV2.E489230 and GPWV8.E489230 identify the same holder and model variants. Confirm current validity, conditions of acceptability and the selected electrical configuration with UL or the supplier before relying on the file.
Publication permission
Pending factory approval
Information still required
Current validity confirmation and conditions of acceptability
Voltage/frequency mapping for each selected variant
Relationship between the Hong Kong holder and Ningbo manufacturer
Approval to publish the original document
CEThird-party conformity certificate
Axial fan · attachment required
TH20BC-016S
Shenzhen Tian Hai Test Technology Co., Ltd.Holder: Ningbo Hongbo Weite Motor Co., Ltd.
2014/35/EU Low Voltage Directive (LVD) – as cited in the scan EN 60335-1: 2012+A13:2017 EN 60335-2-80: 2003+A1:2004+A2:2009
Issue date needs a clearer original; no expiry date readable. Model coverage and current status unverified.Model attachment & declaration required
The document says “See attachment”. The model attachment has not been supplied; model coverage is unconfirmed.
Voltage and frequency coverage are not available from the supplied scan.
Issued to / holder
Ningbo Hongbo Weite Motor Co., Ltd.
Manufacturer
Ningbo Hongbo Weite Motor Co., Ltd.
Issue / audit date
Issue date is partly obscured in the low-resolution stamped scan; not transcribed.
Verification note
This is an issuer Certificate of Conformity, not a manufacturer-signed EU Declaration of Conformity. The underlying report and model attachment are missing.
Publication permission
Pending factory approval
Information still required
Manufacturer-signed Declaration of Conformity
Model attachment
Underlying test report TH20BR-016S
Higher-resolution original showing issue date clearly
Current applicability and document authenticity confirmation
The UL certificate names a Hong Kong-addressed holder; the CE-related document and supplier audit name a Ningbo company. Confirm the relationship, manufacturing location and applicable record for your order.
05 / CERTIFICATIONS
How to Confirm Certification for Your Application
Selecting a fan for industrial equipment requires more than checking a certification logo. The documentation should match the actual product model and intended operating configuration.
01
Identify Your Fan Model
Provide the exact fan model, dimensions and motor configuration.
02
Confirm Electrical Requirements
Share your operating voltage, frequency and application conditions.
03
Review Applicable Documentation
Our team can review the available certification scope, declarations and relevant reports.
04
Confirm Project Requirements
Verify the required standards and documentation before finalizing your purchase or OEM configuration.
OFFICIAL VERIFICATION ROUTES
Use the relevant issuer or directory. A link to a record or verification service does not itself establish current validity.
Are all Hongbo Motor fans covered by the same certifications?
No. Certification coverage depends on the specific fan model, electrical configuration and applicable documentation. Please confirm the required product before placing an order.
Can I request a certificate for a specific model?
Yes. Share your fan model and target market, and our team can review the available documentation.
Does an OEM modification affect certification coverage?
Changes to electrical or mechanical configurations may affect the applicable certification scope. Modified products should be reviewed individually before production.
Can you provide CE or RoHS documentation?
Available documentation depends on the selected fan model and applicable requirements. Please contact our team for model-specific information.
How can I verify a certificate?
Where available, use the official verification information provided with the document. Our team can also assist with identifying the relevant certificate or report.
Model and document matching
Connect the nameplate to the document scope
For example, HB12038-A1(X) identifies an indexed pattern in the published UL file. Use the complete suffix from the nameplate and confirm the electrical configuration before relying on the record.
Model identification example on a Hongbo Motor 28080 fan.
Read the model marking
Photograph the complete label before requesting a drawing, test report or compliance record. Note the full model and suffix, plus the electrical markings printed for that specific fan.
Read the entire model
Capture the part number, suffix, voltage and frequency from the product marking or the agreed drawing.
Match the file and market
Request the document type your customer needs and check that the same model, configuration and end market are covered.
Record the checked revision
Save the issuer record or supplied declaration with the date reviewed and the part number used in the project.
Tell us your required fan model, voltage, application and target market. We can review available documentation and help identify the relevant compliance information for your purchasing requirements.