Home / Engineering Resources / Quotes and Samples
Industrial Cooling Fan Quotes and Samples
Request pricing for a known fan or send the constraints for a new design. Keep the evaluation sample and production quantities clear so the offer can identify the part, documents and timing for each.
On this page
Start with what you know
I know the exact part
Send the complete model and suffix, required quantity and destination. If it is a repeat order, add the last purchase order and confirm any drawing or label revision.
I know the equipment requirements
Share the mounting space, available supply and operating conditions. Include target airflow at pressure when available. Ask for a shortlist when the fan family or model is still open.
I need a change or a replacement
Attach the drawing or photos, state the difference and describe what must stay the same. Use the OEM route for a configuration change or the replacement review for an installed unit.
Build a request we can review
For a production quote or an evaluation sample, send the information below. A drawing, a readable label photo or an equipment sketch gives the review a concrete starting point.
Model or mechanical envelope
Send the full part number, or the hole centres, mounting side, available depth and cable clearance on a drawing or measured sketch.
Electrical and airflow requirements
List AC supply and frequency or the DC supply as applicable, plus the required control or feedback. Provide airflow and static pressure at the same operating point. Record the filter, guard or enclosure restriction affecting the air path.
Evaluation and production quantities
Say how many units will be used for evaluation, the intended production quantity and any planned repeat volume. State the required delivery location and target date, and separate sample timing from production timing.
Approval documents and acceptance
Specify whether you need a mounting drawing, connection details, a performance curve or a compliance document. Name the intended market and the tests or approval criteria the sample must meet.
A 12025 request starts with the drawing
The 12025 AC fan is listed in the nominal 120 × 120 × 25 mm class. The side view on the catalogue sheet shows a depth of 26 ± 0.5 mm. Use the family name to find candidates and the drawing value to check fit.
For a shallow mounting space, send the available depth from the mounting face, the cable exit and the clearance for any guard. Include the full electrical suffix and supply requirements. Request the current drawing and a sample of that configuration before deciding that it fits.
Move from quote to an approved order
01
Send the request
Provide the model or equipment constraints and state whether the immediate decision is candidate selection, a sample or a production quote.
Keep for the next step: A brief the supplier can review against the intended equipment.
02
Review the written offer
Check the proposed part and revision, priced quantities, sample and production lead times, charges, destination, shipping arrangements and the documents included. Clarify exceptions before confirming.
Keep for the next step: A named configuration and a comparable quote.
03
Evaluate the agreed sample
Confirm the sample identification, then check installation, electrical connection and performance in the intended setup. Record the measured conditions and any changes needed.
Keep for the next step: An acceptance record tied to the sample and drawing.
04
Release the approved version
Carry the approved part suffix, drawing or sample reference, label revision and packing details into the order. Keep that baseline with the next order or the change request.
Keep for the next step: A purchase reference that identifies the approved configuration.
Send the request with the version you need
Choose a quote or sample request to open the contact form with the relevant fields in the message. Add the details you have, including the location and the decision you need to make.