Home / Engineering Resources / Purchasing FAQ
Industrial Cooling Fan Purchasing FAQ
Find out what to send for an industrial cooling fan quote, how to approve a sample, which files to request and how to get help with an order.
Quoting and ordering
Identify the application, the part and the quantities the quote needs to cover.
What information do you need to quote a cooling fan?
Send the full fan model if known, the equipment it cools, the permitted frame size and depth, and the available power supply. Add your airflow at static pressure if measured or specified, the sample quantity, the expected order quantity and the delivery destination. If you only know the equipment requirements, state which constraints are fixed so the review can start there.
What are the minimum order quantity, sample cost and lead time?
Ask for these against the exact configuration and destination. State your evaluation quantity and expected production order separately, and identify any wiring, label, packaging or other change. Ask the quotation to show minimum quantity, sample and freight costs, and when each lead time starts so the two schedules can be compared.
Where do I start if I do not have a part number?
Start with the supply available in your equipment and the air path you need to serve. For an existing panel, record its usable dimensions, mounting pattern and depth. An airflow requirement is more useful when it includes the static pressure imposed by the enclosure, filter or duct. Use the selector to identify candidates, then verify the exact part on its drawing and performance curve.
Can the cable, connector or label be changed?
Ask for a review against the base fan and your requested change. For a connector, include its part number, pin assignment, cable exit and available lead length. For artwork or labels, provide the revision and marking requirements. Include the change in the quote and verify it on the sample before ordering the revised configuration.
Samples and replacements
Use the sample to check the same configuration and conditions intended for production.
How do I ask for an evaluation sample?
Identify the model or describe what the sample must fit. State the number of units needed and what the evaluation will decide, such as connector fit, noise at an operating point or performance inside a closed enclosure. Confirm the sample version, availability, charge and shipment details for your request.
Can I request a replacement from a label photo?
A clear label can identify the original model and electrical rating. Add a full fan photo, actual dimensions, mounting-hole centres, connector or lead details and the installed operating conditions. Before approval, compare the candidate drawing and performance against the original in the equipment.
What should we check before approving a sample?
Check fit, connection, airflow direction and clearances using the agreed equipment and drawing. At the intended operating load, record temperatures and any applicable airflow, pressure, noise or feedback requirement against agreed limits. Keep the sample identification, actual setup and result with the drawing revision.
What if we change the fan after the sample was approved?
Record the old and new revisions and identify what could change in the equipment. A lead change calls for an updated connection or fit check. A different impeller, speed setting or air path may change the operating point. Agree the checks affected by the change and identify which orders use the new version.
Drawings, performance and certification
Match each document to the full model and version you are evaluating.
Which technical files can I read or request?
The document centre has selected catalogue sheets, a model index and working records for selection and sample review. Use the model request for the applicable drawing, wiring information, performance curve, test record or conformity document. Include the full suffix and the document purpose so the right version can be identified.
How should I compare airflow for a filtered enclosure?
Compare airflow at the static pressure of the intended air path. Include the inlet, outlet, filter state and any coils or other restrictions. If the available curve is for a different supply, speed or fan suffix, request the applicable curve. Check the selected configuration under the installed load before approval.
Does a certification mark cover all models in a family?
Check the document for the particular model or suffix, voltage variant and destination market. The mark on a label helps identify what to request. Use the issuer, scope and revision of the applicable record when making an approval decision.
How can I choose a fan guard or filter that fits?
Use nominal size to find candidates. Compare the actual mounting-hole centres or panel cutout, mounting side, depth and clearance to the impeller. For a filter, confirm the intended media and allow for its resistance in the installed airflow path. Supply the full fan model and panel drawing when requesting a match.
Delivery, support and repeat orders
Keep the order and the delivered part traceable when you need help.
What should we confirm about packing and delivery?
Tell the order contact the destination, delivery needs and any required carton marks or labels. Confirm the approved unit marking, units per carton, protective packing, shipment timing and the documents you need to receive the order. Request any special arrangements in writing while the order can still be adjusted.
What should I send if the shipment is damaged or incomplete?
Have the order and packing list references, delivery date, carton marks and expected and received quantities ready. Keep the packaging and take photos of the outer carton, internal protection and the unit label. Identify the affected items separately from the rest of the shipment.
How do I check warranty coverage or request a return?
Start with the purchase reference and applicable written order terms. Identify the seller, exact part, affected quantity and lot marking if present, then describe what happened and when. Ask your order contact to review the issue and confirm any return instructions before sending goods.
How do I repeat an order for an approved fan?
Send the last order number, complete part suffix and current drawing or sample reference with the new quantity and destination. Flag changes to the equipment, wiring or label separately. Check the new order against the approved configuration before release, especially when more than one variant uses the same frame.
Bring the application and part details together
For a new project, use the quote and sample checklist. For a delivery or operating issue, include the purchase reference and exact fan in your request.